Silicon Graphics ICE XA Скачать руководство пользователя страница 75

Страница: 75 / 96

Overview

007-6399-002

Communication Hierarchy

Communication within the overall management framework is as follows:

Admin Node

The Admin node communicates with the following:

•

All rack leader controllers (RLCs)

•

All cooling rack controllers (CRCs)

•

All optional cooling distribution units (CDUs)

Rack Leader Controller (RLC)

The RLCs within a “logical rack” (see tip that follows) communicate with the following:

•

All chassis management controllers (CMCs) within the same logical rack as the RLC.

Chassis Management Controllers

The CMCs within a logical rack communicate with the following:

•

The rack leader controllers (RLCs) within the same logical rack

The following two components communicate with CMCs in E-Cell rack systems:

•

The cooling rack controller (CRC) is assigned to the same logical rack as the CMCs

•

The cooling distribution unit (CDU) is assigned to the same logical rack (and VLAN) as the
CMCs

Tip:

A logical rack can be one or two physical racks. The logical rack is based on the RLC.

There is one RLC in each logical rack. An RLC supports a maximum of eight CMCs.
Therefore, one logical rack of enclosures can occupy two physical racks.

Содержание ICE XA

































































































Результаты поиска

Содержание ICE XA

Отзывы:

Silicon Graphics ICE XA, Руководство пользователя по оборудованию, Страница: 75 / 96

Результаты поиска

Содержание ICE XA

Отзывы: