manualshive.com logo in svg

Silicon Graphics ICE XA, Руководство пользователя по оборудованию, Страница: 73 / 96

Поделиться
Скачать
Silicon Graphics ICE XA Скачать руководство пользователя страница 73

007-6399-002

55

Chapter 5

5.

SGI ICE XA Administration/Leader Servers

This chapter describes the function and physical components of the administrative/rack leader 
control servers (also referred to as nodes) in the following sections:

•

“Overview” on page 56

•

“System Hierarchy” on page 56

•

“1U Rack Leader Controller and Administration Server” on page 59

For purposes of this chapter “administration/controller server” is used as a catch-all phrase to 
describe the stand-alone servers that act as management infrastructure controllers. The specialized 
functions these servers perform within the SGI ICE XA system primarily include:

•

Administration and management

•

Rack leader controller (RLC) functions

Other servers described in this chapter can be configured to provide additional services, such as:

•

Fabric management (usually used with larger systems)

•

Login 

•

Batch 

•

I/O gateway (storage)

•

MDS node (Lustre configurations)

•

OSS node (Lustre configurations)

Note that these functions are usually performed by the system’s “service nodes” which are 
additional individual servers set up for single or multiple service tasks.

Содержание ICE XA

































































































Отзывы:

Нет отзывов