manualshive.com logo in svg

Silicon Graphics ICE X, Руководство пользователя, Страница: 87 / 142

Поделиться
Скачать
Silicon Graphics ICE X Скачать руководство пользователя страница 87

007-5806-004

67

Chapter 5

5.

SGI ICE X Administration/Leader Servers 

This chapter describes the function and physical components of the administrative/rack leader 
control servers (also referred to as nodes) in the following sections:

•

“Overview” on page 68

•

“System Hierarchy” on page 68

•

“1U Rack Leader Controller and Administration Server” on page 71

For purposes of this chapter “administration/controller server” is used as a catch-all phrase to 
describe the stand-alone servers that act as management infrastructure controllers. The specialized 
functions these servers perform within the SGI ICE X system primarily include:

•

Administration and management

•

Rack leader controller (RLC) functions

Other servers described in this chapter can be configured to provide additional services, such as:

•

Fabric management (usually used with larger systems)

•

Login 

•

Batch 

•

I/O gateway (storage)

•

MDS node (Lustre configurations)

•

OSS node (Lustre configurations)

Note that these functions are performed by the system’s “service nodes” which are additional 
individual servers set up for single or multiple service tasks.

Содержание ICE X















































































































































Отзывы:

Нет отзывов