manualshive.com logo in svg

Silicon Graphics ICE X, Руководство пользователя, Страница: 39 / 142

Поделиться
Скачать
Silicon Graphics ICE X Скачать руководство пользователя страница 39

Using the 1U Console Option

007-5806-004

19

Using the 1U Console Option

The SGI optional 1U console is a rack-mountable unit that includes a built-in keyboard/touch-pad, 
and uses a 17-inch (43-cm) LCD flat panel display of up to 1280 x 1024 pixels. The 1U console 
attaches to the administrative controller server connectors or to an optional KVM switch (not 
provided standard by SGI). The 1U console is basically a “dumb” VGA terminal, it cannot be used 
as a workstation or loaded with any system administration program. 

Note:  

While the 1U console is normally plugged into the administrative controller server in the 

SGI ICE X system, it can also be connected to a rack leader controller server in the system for 
terminal access purposes.

The 27-pound (12.27-kg) console automatically goes into sleep mode when the cover is closed.

Levels of System and Chassis Control

The chassis management control network configuration of your ICE X series machine will depend 
on the size of the system and the control options selected. Typically, any system with multiple 
blade enclosures will be interconnected by the chassis managers in each blade enclosure. 

Note:  

Mass storage option enclosures are not monitored by the blade enclosure’s chassis manager. 

Most optional mass storage enclosures have their own internal microcontrollers for monitoring 
and controlling all elements of the disk array. 

Chassis Controller Interaction

In all SGI ICE X series systems the system chassis management controllers communicate in the 
following ways: 

•

All blade enclosures within a system are polled for and provide information to the 
administrative node and RLC through their chassis management controllers (CMCs). Note 
that the CMCs are enlarged for clarity in Figure 2-3. 

•

The CMC does the environmental management for each blade enclosure, as well as power 
control, and provides an Ethernet network infrastructure for the management of the system.

Содержание ICE X















































































































































Отзывы:

Нет отзывов