![Silicon Graphics Altix XE1300 Скачать руководство пользователя страница 30](http://html.mh-extra.com/html/silicon-graphics/altix-xe1300/altix-xe1300_quick-reference-manual_1271616030.webp)
22
007-4979-004
1: SGI Altix XE1300 Cluster Quick-reference
3. Set up the network for your InfiniBand switch cluster configuration using the following
information and the IP reference provided in “Web or Telnet Access to the InfiniBand
Switch” on page 20.
Enter the following commands to set up the network:
ISR-xxxx#
config
ISR-xxxx(config)#
interface fast
ISR-xxxx(config-if-fast)#
ip-address-fast set [10.0.21.1] 255.255.0.0
ISR-xxxx(config-if-fast)#
broadcast-fast set 10.0.255.255
ISR-xxxx(config-if-fast)#
exit
ISR-xxxx(config)#
exit
ISR-xxxx#
reset software
(This reboots the 24-port InfiniBand switch)
For a 96-port or larger switch:
4. ISR-xxxx#
reload software
ISR-xxxx#
fast-interface show
(This command lists the IP address)
5. Power cycle the switch by disconnecting its power cable from the power connector, and then
plug it back in.
Using the 1U Console Option
The SGI optional 1U console is a rackmountable unit that includes a built-in keyboard/touchpad,
and uses a 17-inch (43 cm) LCD flat panel display of up to 1280x1024 pixels. The 1U console
attaches to the headnode using PS/2 and HD15M connectors or to a KVM switch (not provided
by SGI). The 1U console is basically a “dumb” VGA terminal, it cannot be used as a workstation
or loaded with any system administration program. The 27-pound (12.27kg) console
automatically goes into sleep mode when the monitor cover is closed down.
Note:
While the 1U console is normally plugged into the head node on the cluster, it can be
connected to any node in the system for terminal access purposes.
Содержание Altix XE1300
Страница 1: ...SGI Altix XE1300 Cluster Quick Reference Guide 007 4979 004 ...
Страница 4: ......
Страница 8: ......
Страница 66: ......