Silicon Graphics 230, Руководство пользователя

Страница: 15 / 148

007-4263-001 xv
About This Guide
This guide provides information on using and administering a Silicon Graphics 230
Visual Workstation.
The following topics are covered in this manual:
• Chapter 1, “System Setup,” describes how to prepare the system for installation and
how to connect it to its peripheral devices.
• Chapter 2, “Installation of Customer Replaceable Components,” describes how to
install customer replaceable components. This includes the removal and
replacement of drives, the power supply, the fans, expansion cards, the system
board, and the I/O gasket.
• Chapter 3, “System Board,” describes the system board and all its major
components. It contains the system board layout, jumper settings, cache and
memory configurations, and information on other internal devices.
• Chapter 4, “Setup Utility,” gives information about the system BIOS and tells how
to configure the system by changing the settings of the BIOS parameters.
• Appendix A, “Connector Pinouts,” contains port pinout information for the rear
panel ports.
• Appendix B, “Physical Environment Specifications,” details the physical
environment specifications for the Silicon Graphics 230 Visual Workstation system.
• Appendix C, “Regulatory Information,” provides regulatory information.
Obtaining Publications
To obtain SGI documentation, go to the SGI Technical Publications Library at
http://techpubs.sgi.com.