SPX Motion
Adjustment Instructions
HOW TO ADJUST BRIDGE:
• Use air heater with small cone
NOTE: do not overheat plastic parts!
• Warm bridge carefully until SPX loses tension
(approx 176
º
F)
• Form it at room temperature
• Keep position until bridge has cooled down
HOW TO ADJUST TRIM:
• Fix trim with assembly pliers (pic 1)
• Use air heater with small cone
NOTE: do not overheat plastic parts or ophthalmic lenses!
• Warm up carefully until SPX loses tension
(approx 176
º
F)
• Form manually when SPX component becomes soft (pic 2)
• Keep in position until trim has cooled down
HOW TO DETACH TEMPLE:
• Position round stick (1.5-2 mm diameter) close to the hinge
• Fold the temple and press together with thumb
