Silex technology DS-700AC, Руководство пользователя

Страница: 150 / 200

142
DS-700AC User's Manual
5.
The Restart page is displayed. Click
Restart
to restart DS-700AC.
The changes will take effect after restart.
When the login page is displayed, the reboot is completed.
Finish the Web browser.
6.
DS-700AC will switch to ECO Mode when it is idle for a certain period of time specified by Power Save
Shift Time (minutes) and the following conditions are met:
- Power Save Mode is set to ENABLE .
- SX Virtual Link is not running on the network DS-700AC is connected to.
- Printing using the print server feature is not performed.
- Because SX Virtual Link regularly communicates with DS-700AC, DS-700AC will not switch to ECO Mode
if SX Virtual Link is running. To start ECO Mode, shut down all PCs with SX Virtual Link installed or close SX
Virtual Link on each PC.
- If printing using the print server feature is performed, DS-700AC will wake up from ECO Mode.
Note
ECO Mode will finish in the following conditions.
Once ECO Mode is finished, the USB Bus power will automatically be enabled on DS-700AC.
- SX Virtual Link is running on the network DS-700AC is connected to.
- Printing using the print server feature is performed.
Conditions to start ECO Mode
Conditions to finish ECO Mode