3
B.) CONNECT THE
INLET PIPES
There are three inlet connections; two on the side a
I
t is not necessary to connect them all, however, you must fill any unused inlet with
the provided plugs
Only straight vertical sections and horizontal sections with small gravity fall.
Caution:
DO NOT INSTALL DIAGONALLY
These connections must be properly secured by placing the clamps over
each opposing side of the gaskets and tightening.
For any inlet left unused, lubricate its joint with grease before sealing
it off with the provided filler plugs or blanking covers
14
Содержание SVP600
Страница 13: ...1 3 4 11...
