SILENT KNIGHT IFP-2000, Инструкция по установке и эксплуатации

Страница: 192 / 238

IFP-2000 Installation Manual
10-18 151430
10.8 Smoke Alarm Verification
Figure 10-5 illustrates how the Smoke Alarm Verification cycle operates.
Figure 10-5 Smoke Verification Cycle
During the Confirmation Period if there is no alarm indication then the system will return to
normal operation.
10.9 Function Keys
The function keys on the IFP-2000 are macro keys that can simplify and make easy access of
disabling/activating up to 50 output groups or individual points.
To access the F-Key Recording Menu:
1. From the idle screen, Press and hold the F-Key that you would like to utilize.
2. Enter a PIN with F-Key macro recording privileges.
10.9.1 Recording an F-Key macro:
1. Access the F-Key Recording Menu and select the ‘Start FKEY Recording’ option.
2. This will exit you from the menu.
3. Any Disabling or Activating of points or output groups from the site at this point will be
programmed into the macro. Do this by going to any annunciator within the site and enter-
ing Main Menu -> Point Functions and use Disable/Enable Pt or I/O Point Control to: dis-
able output groups or individual points, or activate individual points.
4. Once you are done with disabling or activating all the points/output groups you want.
Access the F-Key Recording Menu again and select the ‘End FKEY Recording’ Option.
5. This will exit you from the menu.