SILENT KNIGHT IFP-2000, Инструкция по установке и эксплуатации

Страница: 179 / 238

System Operation
151430 10-5
10.3.2 Using the Menus
10.4 Basic Operation
10.4.1 Setting Time and Date
1. From the Main Menu, select for Set Date and Time.
2. Make changes in the fields on the screen. Use (right arrow) to move through the fields.
Use the and to select options in the fields.
3. When the date and time are correct, press .
10.4.2 Disable / Enable a Point
1. From the Main Menu, select for Point Functions.
2. Select for Disable/Enable Point. A list of modules displays.
3. Use and to move through the list. Press to select the module where the point
you want to disable/enable is located. A description of the point should display. The fourth
line of the screen should show "NORMAL" (meaning that the point is currently enabled)
or "DISABLED" (the point is currently disabled). Press to toggle between NORMAL and
DISABLE.
10.4.3 Disable / Enable NACs by Group
1. From the Main Menu, select for point functions.
2. Select to Disable NACs by group or to Enable NACs by group.
3. Use and to move through the list of groups. Press to select the group high-
lighted.
To move through the menus:
Use
and
to move through the options in a menu. Use to move to a
previous menu.
To select an option: Enter the number of the option.
–OR–
Press (Enter key) if the option appears at the top of the menu (= symbol
displays after the option number in this case).
4
2
1
2
1 2