Silent Gliss SG 3000, Инструкция по установке и эксплуатации

Страница: 4 / 8

EN
Page 4 of 8
3 Installation
3.1 Installation instructions, aids and personal
protection
Local safety regulations must be
observed during installation of the
product (stable ladders, etc.).
Warning! (if applicable)
Young children can be strangled by
loops in pull cords, chains, tapes and
inner cords that operate the product.
To avoid strangulation and
entanglement, keep cords out of the
reach of young children. Cords may
become wrapped around a child’s
neck. Move beds, cots and furniture away from
window covering cords. Do not tie cords together.
Make sure cords do not twist and create a loop.
3.2
Motorisation
Electrical installation must be carried
out by a certified electrician in
accordance with the legal regulations
and standards of the relevant country.
3.3
Unpacking
Unpack components carefully
Waste and packaging material is to be
disposed of in line with local
regulations. Keep packaging material
out of the reach of children. Packing sheets,
Styrofoam pieces and other small parts can be
dangerous for children to play with. Check
delivery items against delivery note.
3.4
System handling
Please note the following during
unpacking and installation: a) do not
cause contamination from unwashed
hands.
b) do not allow moisture to get on the fabric. c)
avoid causing kinks and snags (e.g. by dragging
over surfaces and edges).
3.5
Overhead and wall installation
During installation, window handles
and other protruding items and fittings
must not impair the function of the
product. The fixing material should be
chosen to suit the background. The fitter is
responsible for selecting the correct fixing
materials.
Check:
Raise and lower blind and check correct
winding and square hanging of the fabric.
4 Maintenance
4.1
Repairs / Inspection
Any repair work required by the system
may only be carried out by authorised
specialists.
Only original replacement parts may be
used for repairs.
4.2
Cleaning
The product and its components, such
as mouldings end caps, etc., must not
be treated with aggressive cleaning
products. It is best cleaned with a
slightly damp cloth.
For heavier soiling, warm water with a neutral,
non-abrasive cleaning product (pH-neutral
domestic washing-up liquid) may be used.
4.3
Care hints for fabrics
Washable!
Do not tumble dry
Do not iron!
Do not dry clean!
Do not bleach!
4.4
Disposal
The product must be disposed of in
line with local waste disposal
regulations for industrial waste.
5 EU Conformity
EU conformity has been certified. This
documentation can be requested from Silent
Gliss.