GreenPAK Universal
Development Board
Silego Technology Inc.
www.silego.com
10/13/2014
All these components can be found in components list. If there are no components on a
work area - make sure this component is enabled.
Pin Configuration
Pin #
Pin Name
Type
Pin Description
1
VDD
PWR
Supply Voltage
2
Clock
Digital input
Digital Input
3
Enable
Digital input
Digital Input
11
GND
GND
Ground
20
Counter Output
Push pull output
Digital Output
On Figure 4-1 there are shown all the components used in project; next step is to configure
selected blocks. Double click on PIN20
to open “Properties” panel. Select “1x push pull” from
the drop-down menu in Pin20
properties and hit “Apply” button
