Siko MSA501, Руководство пользователя

Страница: 32 / 51

Communication via
CAN bus (CANopen)
MSA501
Date: 12.10.2018 Art. No. 88734 Mod. status 330/18 Page 32 of 51
5.6.2.12 1011h: Restore Parameter
Object 1011h restores the factory settings of the device depending on the selection. The
string “load” must be sent as data content and the device reset thereafter. If the restored
parameters are intended to be permanently available, they must be stored via object
1010h:
Store Parameter
.
Subindex 00h
Description indicates the largest supported sub-index
Access ro
PDO-Mapping no
Data type UNSIGNED 8
Default 4h
EEPROM no
Subindex 01h
Description Reset all parameters to factory settings
Access rw
PDO-Mapping no
Data type UNSIGNED 32
Default 1h
EEPROM no
Data content Write:
Byte 0
Byte 1 Byte 2 Byte 3
6Ch ("l") 6Fh ("o") 61h ("a") 64h ("d")
Read:
Bit 31 … 1 0, reserviert
Bit 0
1: Device permits loading of default parameters.
Subindex 02h
Description Set only communication parameters to factory settings (1000h-1FFFh, CiA
DS-301)
Access rw
PDO-Mapping no
Data type UNSIGNED 32
Default 1h
EEPROM no
Data content Write:
Byte 0 Byte 1 Byte 2 Byte 3
6Ch ("l") 6Fh ("o") 61h ("a") 64h ("d")
Read:
Bit 31 … 1 0, reserviert
Bit 0
1: Device permits loading of default parameters.