Siko MA10/4, Руководство пользователя, Страница: 3 / 23

MA10/4-SW02 Date: 06.05.2014 Page 3 of 23 Art.No. 87185 Mod. status 422/13
1 General Information
1.1 Documentation
The following documents describe this product:

The product data sheet describes the technical data, the dimensions, the pin assignments,
the accessories and the order key.

The mounting instructions describe the mechanical and electrical installation including all
safety-relevant requirements and the associated technical specifications.

The user manual of commissioning the electronic display.
These documents can also be downloaded at http://www.siko-global.com/en-de/service-
downloads .
1.2 Short Description
In combination with an incremental/SSI encoder the MA10/4 SW02 can be used for measuring
angles in three ranges of resolution (1°, 0.1°, 0.01°). After reaching the respective maximum
value, e. g., 359 (programmable modulo value), the display jumps to 0. With opposite sense of
rotation of the encoder the display jumps back from 0 to 359.
Furthermore, the MA10/4 SW02 may be used as an angle display for mitre-box saws. With the
saw blade swinging, the measured value decreases from 90° into the 0° direction.
2 Key functions
The display is operated and programmed by means of the four keys of the membrane keyboard.
Depending on the operating mode the keys may have additional functions (see 'Programming
mode' and 'Input mode'). The keys are actuated individually or combined (each two of them)
and time-dependent.
Fig. 1 : Key functions
1) Programming
2) Select 'value'
3) Select 'digit'
4) Store value
1) Programming
2) Select 'value'
3) Select 'digit'
4) Store value