Siko MA01/1, Информация пользователя

Страница: 15 / 16

MA01/1 Datum 16.11.2001 Art.Nr. 77320 Z.Nr. 8664054 Änd.Stand 389/01 1 5
Appendix: Application Examples
Length measurement
Required: Display accuracy 1/10 mm. Display
shall be zeroed via function key
Designation Display Progr. value
Resolution _rES_ 0.1
Reference value _rEF_ 00000.0
Offset _oFF_ 00000.0
Decimal point _dP_ 0.0
Counting direction _dIr_ UP
Switch-off method _AUto_ 0
Last value memory _rSTo_ oFF
Access: reset _F_Abs on
Access: increm. meas.
_F_rEL oFF
Access: ref. value _F_rEF oFF
Access: offset _F_oFF oFF
Language _LAn_ E
Angle measurement
Required: display range 0 ... 360°; display
accuracy 1/10 Grad. Display shall be zeroed via
function key.
Conditions: circular disk with Ø 300 mm; resul-
ting total circumference: U =
p
x 300 mm =
942,48 mm
The programmable factor is calculated as fol-
lows: FAC = total display range / circumfe-
rence[1/100 mm] 3600 / 94248 = 0,03820
Designation Display Progr. value
Resolution _rES_ FrEE
Calculating factor _FAC_ 0.03820
Reference value _rEF_ 00000.0
Offset _oFF_ 00000.0
Decimal point _dP_ 0.0
Counting direction _dIr_ UP
Switch-off method _AUto_ 0
Last value memory _ISP_ oFF
Access: reset _F_Abs on
Access: increm. meas.
_F_REL oFF
Access: ref. value _F_rEF oFF
Access: offset _F_OFF oFF
Language _LAn_ E
I II Standard progr. your programming
– •
• • 0.1
• • 0.00000
• • 00000.0
• • 00000.0
• • 0.0
• • UP
– •
– • 0.1
– • 0.00000
– • 00000.0
– • 00000.0
Display Designation/value range
SEnS 1 parameters of sensor 1
_rES_ resolution (mm, In=inch)
1, 0.1, 0.05, 0.01, In 0.01, In 0.001,
FrEE
_FAC_ calculation factor (only if resolution
has been programmed to "FrEE")
0.00001 ... 0.99999
_rEF_ reference value -999999 ...
(+)999999
_oFF_ offset value -999999 ... (+)999999
_dP_ decimal point (only if resolution has
been programmed "FrEE") 0. to 0.000
_dIR_ counting direction UP, dn
SEnS 2 parameters of sensor 2
_rES_ resolution (mm, In=inch) 1, 0.1,
0.05, 0.01, In 0.01, In 0.001, FrEE
_FAC_ calculation factor (only if resolution
has been programmed to "FrEE")
0.00001 ... 0.99999
_rEF_ reference value -999999 ...
(+)999999
_oFF_ offset value -999999 ... (+)999999
Appendix: Parameter list
I = 1-channel version (1 sensor)
II = 2-channel version (2 sensors)
• = parameter, displayed = yes
– = parameter, displaye = no