Siko 6007422, Перевод оригинальной инструкции по установке

Страница: 51 / 64

AG02
Commissioning English
AG02 · Date 31.10.2012 · Art. No. 82270 · Mod. status 354/12
51
right
left
fast/creep
right motion-
left motion-
fast/creep motion-
Fig. 14: Input circuit/digital inputs
Display
LED Digital Analog unipolar Analog bipolar
1, yellow blinking 600 ms =
Start Up
blinking 300 ms =
Current
error, On = opera-
tion
2, blue right enable enable
3, blue left right/left N. C.
4, yellow fast/creep N. C. N. C.
5.3 Potentiometer setting (P10)
Sense of rotation
The measuring range is a result of the transmission of potentiometer's
gear. We deliver the potentiometer with the left turning direction (see
Fig.
15 ).To check the sense of rotation take a measurement of the resistance
value between 'Po' and 'S'.
R = 0 Ohm: sense of rotation i
R = max. value: sense of rotation e
When correctly connected and switched on, the unit displays show the cur-
rent actual value.
5.4 Setting and alignment of the R/I transformer (MWI)
Sensor of rotation
Ex works, the instrument transformer is aligned to default values: 4 mA for
the start position (Po) and 20 mA for the end position (Pe) of the potenti-
ometer. To check the sense of rotation take a measurement of the current
value between 'I+' and 'I-'.
Current I = 4 mA: sense of rotation e
Current I = 20 mA: sense of rotation i
NOTICE
NOTICE