EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 56
It is important that you set correct system time and date on your network for a
scheduled run time.
Click
Download
to start the software download from the server to the system.
Click
Upgrade
to activate the downloaded software. If you have specified time for
the upgrade (Scheduled Run Time [HH:MM]), the software will be activated at this
time. If you have not specified such time, the downloaded software will be activated
immediately.
Note that this action will result in system reboot.
Click
Accept
to accept the new SW.
6.3.3
Licensing
Figure 6-5 System Page: Maintenance
– Licensing
The system provides easy migration to support Gigabit throughput and advanced
features, enabling operators to enhance bandwidth capacity on a “pay as you grow”
basis as well as adding features and capabilities according to their networks evolutions.
The following licenses may be purchased:
Data rate (capacity) – 2000, 5000 or 10000 Mbps
The license upgrade key is a signature file containing the license configuration that is
based on the system's serial number. License file is provided as a text file that can be
Note:
Always upgrade both sides!
When upgrading an operational link, upgrade the remote system first and then the
local system. Accept the software at both ends after verifying that the link performs
as expected.
Note:
The data rate license active on the system dictates the highest modulation profile the
link will reach.
