SIKA PowerCure 400, Оригинальное руководство пользователя

Страница: 63 / 78

63
en
this purpose, but it must be switched off
at least 1 minute in advance (otherwise
the display will be inaccurate). The number
of LEDs that light up indicates the charge
level. A flashing LED signals that a power
reserve of at most 10% remains.
-
Basic requirement: if the power tool does
not function after the battery is plugged
in, connect the battery to the charger.
The displays on the battery and charger
then indicate the battery charge level.
-
At low temperatures, it is possible to con-
tinue working at reduced power.
2.3 Emissions values
Sound power level L
WA
= 87 dB(A)
Sound pressure level L
PA
= 76 dB(A)
Uncertainty K = 1.5 dB
Note
The vibration level specified in these instruc-
tions has been measured according to a mea-
suring process defined in the EN 60745 stan-
dard and can be used for comparing power
tools with one another. It is also suitable for
a provisional estimate of the vibration load.
The specified vibration level represents the
chief applications of the PowerCure dispenser.
However, the vibration level may be different
if the PowerCure dispenser is used for other
applications, with different tool inserts or if it
is not maintained adequately. This can signifi-
cantly increase the vibration load during the
entire working period. The times during which
the device is switched off or is indeed running
but is not actually in use should also be
considered, so as to make a precise estimate
of the vibration load. This can significantly
reduce the vibration load during the entire
working period. Define additional safety
measures to protect the operator against the
effect of vibrations, such as: maintenance
of the PowerCure dispenser and tool inserts,
keeping hands warm, organisation of the
working procedures.
Vibration value ah = 0.6 m/s 2
Uncertainty K = 1.5 m/s
2
2.4 Symbols
Please read the instructions for
use carefully before startup.
Please read the instructions for
use carefully before startup.
Do not charge a damaged battery,
instead renew it immediately.
Do not burn batteries.
Electrical devices are not
allowed to be disposed of as
domestic waste. Electrical and
electronic devices must be
collected separately and taken
to a recycling company for
environmentally friendly disposal.
Contact the local authorities or
your specialist dealer to ask about
recycling and collection points.
Take the waste for recycling.
CE mark
Eurasian customs union mark
Power tool in protection class II.
Power tool in which the protection
against an electric shock does not
depend on the basic insulation,
but also on the use of additional
protection measures such as
double insulation or reinforced
insulation. There is no fixture for
connecting a protective earth
conductor.
The device is only suitable for use
indoors. Do not expose the device
to rain.
T3.15A
Slow-blow equipment fuse 3.15 A