1
Device description
The hand pump creates positive pressure for the inspection,
adjustment or calibration of pressure-measuring devices
(pressure gauges) of all kinds.
The hand pump can be used for test items directly on loca-
tion, thanks to its light weight and compact design.
The hand pump and the pressure hose have MINIMESS
®
connections.
When the hand pump is used, it needs to be connected to a
reference gauge and to the test item.
Type plate and label:
You find the type plate on the lower pump body. It
includes the essential technical data and instruc-
tions.
An additional indication of the maximum allowable
hand pump pressure is located on the upper pump
body (Example
Fig.).
1.1
Delivery, unpacking and accessories
All units have been carefully checked for their operational reliability before shipment.
Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
Report any possible damages to the forwarder and your responsible sales representative.
In such a case, state a description of the defect, the type and the serial number of the de-
vice.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:
Carefully unpack the unit to prevent any damage.
Check the completeness of the delivery based on the delivery note.
Scope of delivery:
1x Hand pump according to the order data.
1x Pressure hose.
1x Operation manual.
Packaging (if applicable).
Accessories as ordered (if applicable).
