SIIG CE-H26F11-S1, Руководство пользователя, Страница: 27 / 32

27
7.5.7 EDID
Interface introduction:
The interface is to set up the EDID for each input port or all the input at once.
INPUT Section: the back content of the ">>" indicates the input source, and the front
content of the ">>" indicates the current EDID information. It support set up the
EDID separately for each input or select all input as the same EDID.
EDID Section: There are two built-in EDID including 4K@30hz and 1080P.
Operating instructions
Select the input source that needs to change the EDID in the INPUT section ("ALL"
means select all input sources), the bottom of the input source is blue;
Select the EDID need to be used in the EDID section and click "Apply" to complete
the setting.
7.5.8 Audio output setting
Interface introduction:
The interface is used to switch and delay the audio of one output or all outputs.