SIIG AV-GM0213-S1, Руководство пользователя

Страница: 8 / 11

6
HARDWARE INSTALLATION
1. Connect your VGA and audio source to the transmitting unit such as CV-917-TX.
2. Connect your display and speakers to AV-GM0213-S1.
3. Connect your CAT-5/5e/6 cable between the transmitting unit and AV-GM0213-S1.
4. Connect your CAT-5/5e/6 cable between AV-GM0213-S1 and the receiving unit.
5. Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
6. Plug in 5V DC power cord to the power jack of AV-GM0213-S1.
7. If a blurred video is seen or even worse on the local display, not displayed at all, try to adjust the
EQ and Gain rotary controls to improve the cable skew. GAIN rotary controls are designed for
gain control, and EQ rotary controls are designed for equalizing the wave form of the receiving
video signal. It is suggested to begin with adjusting the rotary control of EQ to get the input video
displayed first, and then the GAIN according to the video you see on the screen.
8. RGB delay control [De-skew] offers the flexible functionality to allow skew compensation among
VGA R, G, B signals due to long transmission or thru low quality cable. By adjusting the rotary
switch to choose R, G or B color channel at first, then use the push buttons to increase or
decrease the delay in the corresponding color channel. There are totally 31 steps, each step with
2ns difference, for adjusting the delay between each color individually. Then the graphics quality
can be further assured.