27
10. TEST PRINT
The printer has a test print function.
In test printing, firmware version and setting value of function setting, etc. are printed.
Test Print Procedure : Bluetooth Model
(1)
Set the thermal paper in the printer as instructed in "9 THERMAL PAPER SETTING".
Check that no error occurs, and then turn off the printer.
(2)
Press the POWER Switch on while holding down the FEED Switch. Release the POWER Switch
firstly.
Test print starts, then release the FEED Switch.
Figure 10-1
Test Print Sample (Bluetooth Model)
Figure 10-2
Bluetooth Information Printing Sample
Table 10-1
Bluetooth Communication Information
Item
Function
Printer Name
Bluetooth Device Name
Address
Bluetooth Address
Profile
Selected Profile
Auto Connection
iOS Auto Connection
Inquiry Response
Selected Searching Mode
* Bluetooth Communication *
Printer Name: MP-A40
Address: XX:XX:XX:XX:XX:XX
Profile: SPP
Auto Connection: Disable
Inquiry Response: Pairing Mode
