SIGRIST AquaScat SG, Инструкция по эксплуатации, Страница: 104 / 120

Instruction Manual ScrubberGuard Troubleshooting
104 14830E/1
10 Troubleshooting
10.1 Pinpointing faults
DETECTABLE FAULT MEASURE
No reading

Check whether the supply voltage is connected.

Check whether the fine-wire fuse is OK. Section 10.5
Fault message in the display

Analyze the fault message according to Section 10.2
to Section 10.4.
The reading appears to be
wrong

Ensure that the sample to be measured corresponds
to the operating conditions. Section 2.4

Ensure that the sample is free from air bubbles. Sec-
tion 9.4.2

Carry out recalibration. Section 9.4.3

Check whether the system is correctly mounted. Sec-
tion 4

Ensure that the servicing duties have been performed
according to the servicing schedule. Section 9
Table 2: Pinpointing malfunctions
If the listed measures do not lead to the desired results, please consult customer service. Sec-
tion 11