SIGRIST AquaScat S, Инструкция по эксплуатации, Страница: 98 / 108

Instruction Manual AquaScat S Troubleshooting
98 13798E/3
FAULT MESSAGE DESCRIPTION POSSIBLE CAUSES
POWERBOX Actuation of the power box
has been disturbed.

Connection to the power box
has been interrupted.
IO PORT The connection between the
NG_Haupt and NG_Bedi print
in the SICON has been dis-
turbed.

Cable disconnected.

Plug connection defective.
HUMIDITY The relative humidity in the
instrument has risen above
50%.

The desiccant is saturated.

The gaskets on the electronic
component are defective.

The instrument was open too
long.
Table 4: Possible fault messages
10.4 Prioritized fault messages and their effect on operation
CAUTION!
When there is a prioritized fault, the cause of the malfunction is serious.
PRIO (PRIORITIZED FAULT)
If a prioritized fault occurs during operation, it has the
following effects:

The measuring values go to 0.

Prioritized faults can be cleared only by a service
engineer.

When the Prio message occurs, the color of the
status display changes to red and the text de-
scribes the prioritized fault in question.
Example: PRIO DEFAULT VALUES