1. Disconnect AC power before servicing.
2. Refer to wiring diagram for proper connections.
3. All servicing should be performed by qualified personnel.
4. Consult your local building code for approved wiring and
installation.
5. Do not use outdoors.
6. Do not use this equipment for other than intended use.
7. Do not let power cords touch hot surfaces.
8. Mount and secure the fixture at a location and height
to avoid ready access and tampering by unauthorized
persons.
9. The use of accessory equipment is not recommended by
the manufacturer and may cause an unsafe condition.
IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
4
1
2 3
1.
See Fig 2., circuit wiring. Trim leads as required and connect color-matched 24VDC
input/output wiring as shown with standard wire nuts. Cap off BLUE wire from power
supply if security lighting not required.
2.
Mount Base Plate to J-Box with two #8-32 screws, flush to the wall.
3.
Connect polarized lamp plugs and attach housing the Base Plate with side pins and
center locking screw provided.
4.
Apply power and check lamp operation.
ITEM QTY P/N
DESCRIPTION
DEEP J-BOX
4" X 4" X 2 1/8"
BY OTHERS
1
1
342001 BASE PLATE ASSBY
2
1
342002 HOUSING ASSBY 2 LAMP
3
1
342003
HOUSING ASSBY 3 LAMP
4
1
608100
LENS
1
HOUSING
LOCK SCREW
INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL
LED Wall Pack
Series MLW-RE
Moonlite LED
™
Remote Series Operating from Central Battery System Series CBS
02.17.06
