addition to this automatically assigned IP address, the Access
Point and USB key also have a static IP address, even when DHCP
is enabled. This can be helpful in case you are unable to retrieve
what address has been assigned by the DHCP server. The default
static IP address is:
•
192.168.1.10 (6002Access Points)
•
192.168.1.20 (6002 USB key)
The corresponding default subset mask is:
•
255.255.255.0
In case your LAN network configuration uses different IP
configuration settings, you must temporarily apply the IP settings
described above to configure your Access Point and USB Key, and
switch back afterwards.
Once you have logged in to the web configuration system, the IP
settings can be changed, for example to apply a different static IP
address and subnet, or to enable dynamic addressing using DHCP.
These settings are described in section 4.7.2.
Logging in to the Web configuration system
To access the web configuration system, please open a standard
web browser and enter the correct IP address of the device.
Enter the Security password in the pop-up dialog. Default
password:
•
Trulifi 6002.0 USB Key: trulifi%2019
•
Trulifi 6002.1 USB Key: serial number printed on the back
side of the device
•
Trulifi 6002.0 Access Point: trulifi%2019
•
Trulifi 6002.1 and 6002.2 Access Point: serial number is
printed on the top cover of the device
Note
: On the Trulifi 6002.0 USB Key this password is fixed. On the
Trulifi 6002.1 USB Key this password can be changed by the user in
the Settings tab.
After entering the password successfully, the main overview
window opens. On the left side of this window there are several
menu tabs to view and change system configuration parameters.
Note
: For systems with Firmware v3.3.1 (or higher) the password
required to return the system (for Access Point and for USB key) to
the factory default settings is:
trulifi%2019
Device Information
The Device Information tab shows various static information about
the USB Key and the LiFi connection. The information in this tab
cannot be changed.
Optical Link Performance tab
The Optical Link Performance tab displays the MAC-address of the
devices connected as well as the optical link performance.
Security tab
The security tab allows to change the preconfigured LiFi
encryption password to restrict access to the LiFi network. Note
that the LiFi encryption password is independent from the
password to log in to the Web configuration system.
•
The default password to access the Web UI for the Trulifi
6002.1 USB Key is the serial number which is printed on the
back of the device
•
The default LiFi encryption password is:
trulifi