7
www.signaturebrand.co
ASSEMBLY
Attaching the Main Body and Handle:
1. Insert the Swivel Joint into designated
hole in the Main Body until it locks in place
with the Lock Button on the Main Body
(you will hear a clicking sound).
2. Connect the body of the handle together
in accordance with the following picture.
Note:
Assemble the plastic tubes without the
Cable Winder in the middle. Line each tube up
and insert them into each other.
3. Attach the handle the main body of the
mop by inserting to the top of the plastic
tube. (See opposite)
Attaching the Microfiber Cloth:
1. Place the Microfiber Cloth Pad onto the
mop head.
2. Fasten the Microfiber Cloth Pad by pulling
the cord while pressing on the toggle.
Assembling the Carpet Glider:
1. When using Steam Mop on carpets, place
the mop head (with microfiber cloth) over
the Carpet Glider.
Note:
Do not operate without the Microfiber
Cloth Pad in place.
Filling The Water Tank:
IMPORTANT:
Always ensure that the unit is
disconnected from the mains outlet prior to the
initial filling of the water tank, and before fitting
the bottom of the mop head.
Never use the steam mop without the
microfiber cleaning pad securely in place.
1. Turn the cap and then lift it up to remove it
from the water tank.
2. Using the measuring cup, pour one cup of
water into the water tank.
3. Place the cap back on onto the tank.
