Signature Kitchen Suite SKSUD2402P, Руководство по установке

Страница: 5 / 28

5 INSTALLATION
ENGLISH
INSTALLATION
Before Installation
WARNING
• Do not store or install the appliance where it will
be exposed to:
- outside weather
- water damage
- temperatures under 32°F (0°C)
Choosing the Install Location
Temperature and Humidity
• The appliance should be installed in a dry, well
ventilated area.
• The ambient temperature should stay between
55 °F (13 °C) and 110 °F (43 °C), to avoid
malfunctions.
• Do not install product where it will be exposed to
direct sunlight or near a heat source, such as an
oven or radiator.
Anti-tip Devices
WARNING
• Tip Hazard
- The appliance is very heavy and may tip over if
the door is opened before the appliance is
securely installed.
- Install the supplied anti-tip brackets to prevent
the appliance from tipping. The safest method
of installing the appliance in a stable position
is to use the supplied anti-tip devices.
- Do not open the appliance door unless it is still
on the pallet or the anti-tip brackets are
engaged.
• If the enclosure is sturdy enough, attaching the
appliance to the upper and side walls of the
enclosure may provide additional stability, as
long as the enclosure is firmly connected to the
back wall. If in doubt, contact an architect or
structural engineer.
Enclosure
• The panel above the appliance must be made
from a solid material (not MDF) that is at least 5/
8" (16 mm) thick.
• The side walls of the cavity or enclosure must be
flush.
• The front 4 inches (100 mm) of the interior
surface (furniture return) will be visible when
doors are open. Make sure this area is finished
to at least 4 inches deep.
• Follow the specifications for the installation
enclosure to ensure a trouble free installation.
• Above all, the enclosure cannot be out of square.
Use a spirit level or measure the diagonals of the
opening to make sure corners are square.
• The appliance is attached at the sides and the
top to either the enclosure or to adjacent
cabinets. Make sure the enclosure or the
adjacent cabinets are securely connected to the
floor or wall structures.
Floor
WARNING
• The floor in the installation area must be firm,
level, and rigid for safe installation and best
performance.
• Do not install the appliance on a platform or
raised structure.
• The structure underneath the appliance must be
able to support the weight of the appliace
without tilting or flexing.
• For best performance and to avoid leakage, level
the appliance.
Electrical Requirements
WARNING
• Electrical Shock Hazard
- Plug into a grounded 3 prong outlet.
- Do not remove ground prong.
- Do not use an adapter.
- Do not use an extension cord.
• Failure to follow these instructions can result in
death, fire, or electrical shock.
• Follow all state and local codes or NEC.
• The appliance comes with a UL listed 3 wire
power supply cord.
• The appliance requires a 3-wire receptacle.