Signature Kitchen Suite SKSUD2402P, Руководство по установке

Страница: 14 / 28

14 INSTALLATION
4
Tie a long string around the middle of the power cord. Feed the string over the top of the appliance,
pull it until the power cord is held high off the ground, then tape the string to the front of the
appliance to hold the power cord off the ground. Do not pinch or strain the power cord. Make sure it
is still plugged in.
5
Carefully move the appliance into the enclosure, making sure not to pinch thepower cord or water line
under or behind the appliance.
6
Remove the edge protection on the enclosure.
B
Aligning and Leveling the Appliance
• Depth Adjustment
- Adjust the depth of the unit in the enclosure so the door panels will fit flush with the surrounding
cabinetry. Use the gauge tool provided for a precise fit.
• Height Adjustment
- The front and rear leveling legs can both be adjusted from the front.
• Leveling
- Once the appliance is aligned properly in the enclosure, level it using the front and rear leveling legs.
1
Use a Phillips screwdriver and wrench to extend the front and rear leveling legs until they are in firm
contact with the floor.
Rear
adjustment
Front
adjustment
)URQW
DGMXVWPHQW
5HDU
DGMXVWPHQW