Signature Kitchen Suite SKSFD3613 Series Скачать руководство пользователя

Страница: 31 / 64

OPERATION

ENGLISH

Freezer Icemaker (Craft Ice

)

This feature is only available on some models.

Feeler Arm

Power Switch

CAUTION

• Do not insert round ice into the in-door ice bin,

as it can damage the ice and water dispenser.

NOTE

• The icemaker begins producing ice

approximately 48 hours after the appliance is

initially installed. The first batches of ice may not

be round and clear.

• Following installation or water filter

replacement, the first few batches of ice may be

semicircular or contain air bubbles.

• If the water pressure is less than 20 psi (138 kPa)

or a reverse osmosis system is used, the shape

of the ice may vary.

• The ice may look cloudy depending on the water

quality in the installation location and the

operating conditions.

• Throw away any shards of ice you may find in the

ice bin, as they may stick to the ice stored in the

ice bin.

• After a short term power outage, it will take

longer to make the first batch of ice, and the ice

may not be round. If the power will be out for a

longer period, throw away the ice stored in the

ice bin.

• The

Craft Ice

icemaker produces 1 batch of

round ice (3 pieces) at a time.

• In

3 ICE

mode (default setting), the

Craft Ice

icemaker produces 1 batch of round ice (3

pieces) about every 24 hours. In

6 ICE

mode, the

Craft Ice

icemaker produces 2 batches of round

ice (6 pieces total) in the same period.

• For more ice, select the

6 ICE

mode. For clearer

ice, select the

3 ICE

mode.

• The time needed to make ice may vary according

to operating conditions.

• The ice bin stores 20 - 30 pieces of round ice.

Turning the Icemaker On/Off

To turn the automatic icemaker On/Off, press the

power switch on the icemaker to the ON ( | ) or

OFF (O) position.

Normal Sounds You May Hear

• Keeping the power turned on to the icemaker

before the water line is connected can damage

the icemaker.

• The icemaker water valve buzzes as the

icemaker fills with water. If the icemaker power

button is in the ON position, it will buzz even if it

has not yet been hooked up to water. To stop the

buzzing, press the icemaker power button to

turn it off.

• You will hear the sound of ice dropping into the

bin and water running in the pipes as the

icemaker refills.

Preparing for Vacation

Set the icemaker power button to OFF and shut off

the water supply to the refrigerator.

NOTE

• The ice bin should be emptied any time the

icemaker power button is turned to the OFF

position.

If the ambient temperature will drop below

freezing, have a qualified technician drain the

water supply system to prevent serious property

damage due to flooding caused by ruptured water

lines or connections.

Storing Food

Food Storage Tips

Wrap or store food in the refrigerator in airtight

and moisture-proof material unless otherwise

noted. This prevents food odor and taste transfer

throughout the refrigerator. For dated products,

check date code to ensure freshness.

Содержание SKSFD3613 Series

































































Результаты поиска

Содержание SKSFD3613 Series

Отзывы:

Похожие инструкции для SKSFD3613 Series

Бренды по названию

Популярные бренды

Signature Kitchen Suite SKSFD3613 Series, Руководство пользователя

Результаты поиска

Содержание SKSFD3613 Series

Отзывы:

Похожие инструкции для SKSFD3613 Series

Бренды по названию

Популярные бренды