Signature Kitchen Suite SKSCV3002S, Руководство по установке

Страница: 8 / 40

- 8 -
Part 2 INSTALLATION REQUIREMENTS
3 INSTALLATION DRAWINGS
(SKSDV3002S, FOR 30” DOUBLE BUILT-IN OVEN)
The first step of the installation is to measure the current cutout dimensions and compare them to the cutout
dimensions shown below. Little or no cabinet work may be necessary.
IMPORTANT NOTE
•
The cabinet base platform must be able to support 325lbs (147kg). If the cabinet does not have a solid bottom,
two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven.
Make sure the base is level and the front of the cabinet is square. If the cabinet base is not level, the oven racks
will tend to slide out when opening the door.
•
If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood
shims under the runners and front trim until the marks or opening are covered.
•
If the cabinet does not have a front frame and the sides are less than 3/4” (1.9 cm) thick, shim both sides
equally to establish the cutout width.
•
The junction box must be flush with the rear wall of the cabinet as shown below.
•
Allow at least a 23” clearance for the door depth when it is open.
•
Kitchen cabinets in contact with the oven must be heat resistant up to 194°F (90°C), and fronts of nearby units
up to at least 158°F (70°C).
•
Do not remove the gliding racks from the base packing. Gliding racks are attached separately to the top and
bottom of the oven.
H
G
Q
L
N
P
M
J
I
K
O
F
D
E
A
B
C
a
Conduit opening
b
Circuit breaker
- Dimensions Double Oven
A Height 52 1/16" (1323 mm)
B Width 29 3/4” (755 mm)
C Depth 23 3/8” (593 mm)
D Height (standard installation) 51 9/16” (1310 mm)
E Height (power cord) 50 5/16" (1277.2 mm)
F Length (power cord) 60” (1524 mm)
G Width (back) 27 3/8” (695.3 mm)
H Width (standard installation) 28 3/7” (722 mm)
I Cabinet width 30” (762 mm)
J Overlap of oven 1” (25.4 mm)
K Cutout width 28 1/2” Min. (723.9 mm), 28 5/8” Max. (727 mm)
L Depth of open door 23” (584.2 mm)
M Cutout height 51 13/16” Min. (1316 mm), 51 15/16” Max. (1319.2 mm)
N Cutout depth 24” Min. (610 mm)
O Cutout location from floor 12” (304.8 mm)
P Height of conduit opening from floor of cutout 47” (1193.8 mm)
Q Distance of conduit opening from side of cabinet 5” (127 mm)