Signametrics Corporation SMU2060, Руководство оператора

Страница: 115 / 182

115
Signametrics
Remarks
To use this function, the DMM must be in the Inductance measurement mode, and a valid
inductance value must have been read prior to using this function. Resulting series
resistance (Rs) is stored as double-precision floating-point number in the location pointed
to by
lpdResult
. See also DMMReadInductorQ .
Parameter Type/Description
nDmm
int Identifies the DMM. DMMs are numbered starting with zero.
lpdResult
double * Points to the location to hold the inductor’s Rs.
Return Value
The return value is one of the following constants.
Value Meaning
DMM_OKAY Operation successfully completed.
Negative Value Error code
Example
double Rs;
int status = DMMReadInductorR(0, &Rs);
DMMReadLoSense
SMU2060  SMU2064 
Description
Measure the DC voltage present at the I+ termial.
#include "SMU2060.h"
int DMMReadLoSense(int
nDmm
, double *
lpdRead
)
Remarks
This function returns a double floating-point reading indicating the voltage present
between the V- and the I- terminals. It is valid while the DMM is in 2-Wire Ohms, VDC
or IDC source mode. The returned value is in base units. That is in the range of range of
±2.4V. Values above this are an indication of over range condition. See also
DMMReadHiSense .
Parameter Type/Description
nDmm
int Identifies the DMM. DMMs are numbered starting with zero.
lpdRead
double * Pointer to a location where the reading is saved.
Return Value
Integer value version code or an error code.
Value Meaning
POS_FS or NEG_FS Positive or Negative Full Scale, or overrange
Negative Value Error code
DMM_OKAY
Valid return.
Example
double reading; int status = DMMReadLoSense(0, &reading);