SignaMax SC30010, Справочное руководство CLI

Страница: 99 / 671

Chapter 4
| System Management Commands
File Management
– 99 –
public-key - Keyword that allows you to copy a SSH key from a
TFTP server. (
See “Secure Shell” on page 225.
)
running-config - Keyword that allows you to copy to/from the
current running configuration.
sftp - Keyword that copies a file to or from an SFTP server.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
◆
The system prompts for data required to complete the copy command.
◆
The destination file name should not contain slashes (\ or /), and the
maximum length for file names is 32 characters for files on the switch or
127 characters for files on the server. (Valid characters: A-Z, a-z, 0-9, “.”, “-
”)
◆ The switch supports only two operation code files, but the maximum
number of user-defined configuration files is 16.
◆
You can use “Factory_Default_Config.cfg” as the source to copy from the
factory default configuration file, but you cannot use it as the destination.
◆ To replace the startup configuration, you must use startup-config as the
destination.
◆
The Boot ROM and Loader cannot be uploaded or downloaded from the
FTP/SFTP/TFTP server. You must follow the instructions in the release
notes for new firmware, or contact your distributor for help.
◆
For information on specifying an https-certificate, see “Replacing the
Default Secure-site Certificate” in the
Web Management Guide . For
information on configuring the switch to use HTTPS for a secure
connection, see the
ip http secure-server command.
◆ The reload command will not be accepted during copy operations to flash
memory.
◆
When logging into an FTP server, the interface prompts for a user name
and password configured on the remote server. Note that “anonymous” is
set as the default user name.