Chapter 8
| Authentication Commands
AAA
– 209 –
servers, and do not actually send any information to the servers about the
methods to use.
Example
Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#
aaa accounting exec
This command enables the accounting of requested Exec services for network
access. Use the
no
form to disable the accounting service.
Syntax
aaa accounting
exec
{
default
|
method-name
}
start-stop group
{
radius
|
|
server-group
}
no aaa accounting
exec
{
default
|
method-name
}
default
- Specifies the default accounting method for service
requests.
method-name -
Specifies an accounting method for service
requests. (Range: 1-64 characters)
start-stop
- Records accounting from starting point and stopping
point.
group
- Specifies the server group to use.
radius
- Specifies all RADIUS hosts configure with the
command.
- Specifies all hosts configure with the
server-group -
Specifies the name of a server group configured
with the
command. (Range: 1-64 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
◆
This command runs accounting for Exec service requests for the local
console and Telnet connections.
◆
Note that the
default
and
method-name
fields are only used to describe
the accounting method(s) configured on the specified RADIUS or
servers, and do not actually send any information to the servers
about the methods to use.
Содержание SC30010
