SignaMax SC30010, Справочное руководство CLI

Страница: 166 / 671

Chapter 5
| SNMP Commands
– 166 –
◆ A local engine ID is automatically generated that is unique to the switch.
This is referred to as the default engine ID. If the local engine ID is deleted
or changed, all SNMP users will be cleared. You will need to reconfigure
all existing users (
page 167 ).
Example
Console(config)#snmp-server engine-id local 1234567890
Console(config)#snmp-server engine-id remote 192.168.1.19 9876543210
Console(config)#
Related Commands
snmp-server host ( 161 )
snmp-server group
This command adds an SNMP group, mapping SNMP users to SNMP views.
Use the
no form to remove an SNMP group.
Syntax
snmp-server group groupname
{ v1 | v2c | v3 { auth | noauth | priv }}
[ read readview ] [ write writeview ] [ notify notifyview ]
no snmp-server group groupname
groupname - Name of an SNMP group. (Range: 1-32 characters)
v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See “Simple Network Management Protocol” in the Web
Management Guide for further information about these
authentication and encryption options.
readview - Defines the view for read access. (1-32 characters)
writeview - Defines the view for write access. (1-32 characters)
notifyview - Defines the view for notifications. (1-32 characters)
Default Setting
Default groups: public * (read only), private † (read/write)
readview - Every object belonging to the Internet OID space (1).
writeview - Nothing is defined.
notifyview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
◆
A group sets the access policy for the assigned users.
*. No view is defined.
†. Maps to the defaultview.