SignaMax 500-7624FE2GC, Руководство пользователя

Страница: 33 / 144

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
32
sysname <system_name> Enter a unique name for this Managed Switch of
up to 55 alphanumeric characters. Use a
descriptive name to identify the Managed Switch
in relation to your network, for example,
“Backbone 1”. This name is mainly used for
reference only.
syslocation<system_location> Enter a unique location for the Managed Switch
of up to 55 alphanumeric characters.
hostname Enter a new hostname prompt for this Managed
Switch of up to 15 alphanumeric characters. By
default, the hostname prompt shows the model
name of this Managed Switch. You can change
the factory-assigned hostname prompt to the
one that is easy for you to identify (e.g. location)
during network configuration and maintenance.
exit Quit the current mode and return to Enable
Mode.
show
Show current system information settings.
2.5.8 Time-server command mode
Enter the time-server command in Enable mode. Then, the time-server mode shows as
follows:
SWH# time-server
SWH(time-server)#
Command Purpose & Description Usage
=================== =========================== =============================
mode Set Mode mode <enable|disable>
ip-addr Set IP Addr ip-addr <ip_addr>
2nd-addr Set 2nd Addr 2nd-addr <2nd_addr>
syninterval Set Syn-Interval syninterval <hour>
time-zone Set Time Zone time-zone <time_zone>
day-saving Set Daylight Saving day-saving <enable|disable>
offset Set Offset offset <hour>
exit Exit from current mode exit
show Show Time Server Settings show
SWH(time-server)#
Prompt Command &Parameter Description
mode <enable | disable> Enable or disable NTP time server function.
ip-addr <ip_addr> Specify the first NTP time server IP address.
<ip_addr>: Enter the time server IP address.
2nd-addr <2nd_addr>
Specify the second NTP time server IP
address.
<2nd_addr>: Enter the second time server IP
address.
syninterval <hour> Specify the interval time to synchronize from
NTP time server.
<hour>: 1~24 hours
For example:
SWH(time-server)# syninterval 2
SWH(time-server)#
time-zone <time_zone> Specify the appropriate time zone from the list.
To view the list, type in time-zone after