S-DIAS SAFETY CPU MODULE
SCP 011
28.02.2020
Page 11
2.4
Compatibility
The safety-related module SCP 011 is supported with firmware version V334 and build No.
1156 or higher of the Safety Designer.
Use of Safe Analog Values (SAFEDINT):
If Safe analog values (variables of type SAFEDINT) are transferred and further processed,
an SCP011 with Firmware version V344 or higher MUST be used (HW version 1.60).
SAFEDINT variables are transferred when for two or more Safety CPU's in a project,
SAFEDINT values are placed in the networks of the remote Safety CPU or with the use of
SAFEDINT values in interface frames (safe variables).
Compatibility
For compatibility of the S-DIAS Safety modules, see section
"Compatibility of S-DIAS Safety Modules" in the system
handbook.
