SIGMATEK RAE 100, Руководство пользователя, Страница: 16 / 76

REMOTE ACCESS HOW TO
Page 16 07.10.2021
b. Enter the command "PACKAGE INSTALL ixagent" in the command line
and press Enter or "Execute" (Figure 4.19). Installation may take some
time. Wait for the return (Figure 4.20).
c. After RAE is installed, it must be enabled with the command "ixagent start"
(Figure 4.19). Wait for the return (Figure 4.20).
d. To check internet connection, via the Remote CLI enter the command
"ping www.google.com " (or a site accessible from your region) in the
command line and press Enter or "Execute". If the machine can reach the
internet a latency value will be reported for the ping command.
e. The RAE application must be started after installation:
i. On-
demand the command “ixagent start” may be executed from
the Remote CLI (Figure 4.21).
ii. For automatic start-up with the machine, the same command
“ixagent start” should be appended to the Autoexec.lsl (Figure
4.22).
Figure 4.13 Editing the Autoexec.lsl from Class 2.