SIGMATEK HGW 1033, Руководство по эксплуатации

Страница: 25 / 84

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3
INFORMATION
The HGW 1033-3 has an intelligent charging circuit, which ensures
optimal charging of the integrated battery pack. For this reason, the
HGW 1033-3 can remain docked to the base station.
The HGW 1033-3 is delivered with a partially charged battery and
should be completely charged by the customer before use.
With a 30 % charge, the device can be stored in transport mode for 6
months at 25 °C
After 6 months, the battery must be recharged to avoid damage to the
battery.
4.6 Wireless
INFORMATION
The devices can only be used in the country designated or configured
for this purpose, as the maximum permitted transmission power, as well
as approved channels can greatly differ.
Please note that DFS/TPC is inactive on our devices and we therefore
do not recommend the corresponding channels!
Non-compliance with these specifications can result in legal
consequences, for which SIGMATEK accepts no liability!
Already during the planning stage, caution must be taken to ensure that
the radio channels are configured so that interference with other
products is prevented.
The document "WLAN Configuration" must be used for the
configuration. All channels currently supported by the software and
hardware are described there.
4.6.1 WLAN 2.4 GHz
Frequency range 2399.5-2484.5 MHz
Transmission power max. 20 dBm (100 mW) EIRP
Channels 1-13 (2412-2472 MHz)
03.03.2021 Page 23