SIGMATEK DIAS-DRIVE 210-23, Руководство пользователя, Страница: 40 / 91

DIAS-DRIVE 210-23
Page 40 30.03.2021
3.5.2 Classic Emergency-Stop (Stop-Category 0)
The cable length for the motor is limited to 25 m. If a longer cable is used, additional sup-
pression coils in the motor output are required.
Note:
The KEM coil must be turned on before the amplifier is enabled and
can be turned off after at least 1 ms after the amplifier is "disabled.
The resistance value and the power of the R
EM
resistor are calculated using the following
formulas:
maxSPEED
Maximum revolutions [RPM]
I
max
Maximum motor current allowed [A]
K
Erms
Voltage constant of the motor [V*min]
 
8 . 0
max
max


= 
I
K SPEED
R
Erms
EM
 
10
)² 8 . 0 (
max EM
EM
R I
W P
 
=