SIGMATEK DIAS-DRIVE 210-23, Руководство пользователя, Страница: 16 / 91

DIAS-DRIVE 210-23
Page 16 30.03.2021
1.9 Technical Data
DIM
DIAS-Drive
SDD 210-23
Rated values
Rated input voltage (symmetrical
opposite to earth) max. 5000 Aeff.
(L1, L2, L3)
V
AC
3 x 230V-10% - 480V 10% , 45
– 65 Hz
Max. peak current in electrical
torque (limited by the load circuit)
A 2.5
Rated power in S1 mode kVA 14
Rated intermediate circuit voltage V
DC
290 - 680
Over voltage protection - limit for the
intermediate circuit
V
DC
450 - 900
Additional voltage 24V V
DC
22 - 30
Power from the addi24
supply
W 35
Holding brake 24V-BR V
DC
25 - 27
Max. Holding brake current per axis A
DC
2
Holding brake voltage drop with a
load +24V-BR
V
DC
Max. 1 (at 2 x 2 A Stop brake current)
Max. holding brake switching
energy
mJ 100
Rated current for axis 1 (eff. +/- 3%) A
rms
10
Max. standstill current axis 1 from
500 ms
A
rms
7
Rated current for axis 2 (eff. +/- 3%) A
rms
10
Max. standstill current axis 2 from
500 ms
A
rms
7
Max. total continuous current of all
axis (heat sink)
A
rms
20
Peak output current axis 1 for a
max. 5s (eff. +/- 3%)
A
rms
20
Peak output current axis 2 for a
max. 5s (eff. +/- 3%)
A
rms
20
The loss in the power output stage
(add the average current of the 2
axes and multiply by the factor)
without brake unit loss
W /
A
rms
10
Output frequency of the power
output stage
kHz 8
Maximum output current for 8 V -
feedback systems at X6, X8
mA 250
Minimum output current for 8 V -
feedback systems at X6, X8
mA 0
Maximum output current for 5 V -
feedback systems at X6, X8
mA 250
Minimum output current for 5 V -
feedback systems at X6, X8
mA 50
Maximum residual current mA 15