SIGMATEK DIAS-DRIVE 210-23, Руководство пользователя, Страница: 5 / 91

DIAS-DRIVE 210-23
30.03.2021 Page 5
1.3 Safety Guidelines
Before installation and startup, it is important to read the documenta-
tion provided. Incorrect handling of the servo amplifier can lead to per-
sonnel injury or material damage. The technical data and connection
instructions (specification label and documentation) must be followed.
Only qualified personnel may perform tasks such as transportation, as-
sembly, Initial startup and maintenance. Qualified personnel are per-
sons familiar with the transportation, setup, assembly, initial startup
and operation of motors and possess the corresponding qualifications
for their specific job.
The machine manufacturer must perform a safety analysis for the entire
machine. The manufacturer must take appropriate measures to ensure
that no injuries or damage can be caused by unexpected movements.
Improper operation of the servo amplifier or failure to follow the follow-
ing guidelines and improper handling of the safety equipment can
cause damage to the machine, personnel injury, electrical shock or in
extreme cases, death.
Notes
Danger! Electrical shock
After disconnecting the servo amplifier from the voltage supply, a wait-time of
5 minutes is required before current conducting components in the amplifier
(i.e. clamps) can be touched or connectors removed. After turning off the
voltage supply, the internal capacitors can remain at dangerous voltage lev-
els for up to 5 minutes. For safety purposes, measure the voltage in the in-
termediate circuit and wait until the voltage is below 40 V.
The electrical connectors of the servo amplifier cannot be removed while
voltage is still applied. The possibility for arcing exists and could cause injury
as well as damage to the contacts.