SIGMATEK DIAS-DRIVE 210-23, Руководство пользователя, Страница: 2 / 91

DIAS-DRIVE 210-23
Page 2 30.03.2021
1 General 1
1.1 About this Handbook 1
1.2 Abbreviations used in this handbook 4
1.3 Safety Guidelines 5
1.4 Servo Amplifier Components 8
1.5 European Guidelines and Standards 9
1.6 Designated Use 10
1.7 Non-Designated Use 11
1.8 Block Diagram 12
1.9 Technical Data 16
1.10 Environmental conditions, Ventilation and Mounting 19
1.11 Auxiliary supply voltage 19
2 Installation 20
2.1 Important Guidelines 20
2.2 Configuration of the Control Cabinet 22
2.2.1 Wiring Diagram and Pin Layout 22
2.2.2 Mechanical Construction and Mounting 24
2.2.3 Laying the motor and control cables 26
2.2.4 Connector Layout 27
2.2.5 Cable Types 27
2.2.6 External Fuse 28
2.2.7 Voltage Supply Options 29
2.2.8 Using Cooling Devices 31
2.2.9 Turn on/off response of the servo amplifier 33
2.2.10 Stop Brake Control 34
3 Connections 35
3.1 Main Power supply (X1B) 35
3.2 24 V Auxiliary supply
– Stop Brake Supply (X1A) 36
3.3 DC-link (X1B) 37
3.4 External brake resistance (X1B) 38
3.5 Motor connections (X3, X5) 39
3.5.1 Standard configuration 39
3.5.2 Classic Emergency-Stop (Stop-Category 0) 40
3.5.3 Personnel-Safe Stop Brake Control 41
3.6 Feedback (X6, X8) 42
3.6.1 Resolver Feedback 43
3.6.2 EnDAT
®
Signal Encoder 44
3.6.3 Hiperface
®
Signal Encoder 45
3.6.4 Sine/Cosine & TTL Encoder feedback 46