SIGMATEK AI 022-1, Руководство по эксплуатации

Страница: 23 / 26

S-DIAS STRAIN GAUGE INPUT MODULE AI 022-1
04.11.2020 Page 21
-2 Invalid CRC in the factory settings
-3 Invalid input parameters (must be 1, 2 or 3)
0 Reset successful, if ConfigValid goes to 1
Analog Input [1-
2]Factory Set-
tings Active
State Shows whether the ADC for the respective channel is set to factory settings.
0 ADC configuration is different to factory settings
1 ADC configuration matches with factory settings
-1 Factory settings are not available (too old FW version (at least
1.80 or higher) or invalid CRC in the factory settings data (can
occur with firmware update with update stick)
7.3 Communication Interfaces
ALARM Downlink With this downlink the corresponding alarm class can be placed via the hard-
ware editor.