SIGMATEK 12-246-011 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 50

SIGMATEK 12-246-011 Скачать руководство пользователя страница 43

ACCESPOINT WLAN HGW

BWH 011

27.11.2020

Page 41

10.5 Operation

The BWH 011 base station needs no special handling. It is ready for operation as soon as
power is supplied and the application is started.
The process for coupling the operating panel can be found in chapter 10.5.1.
The meaning of the LED displays is described in chapter 6.3.
The IP addresses are configured using LASAL.
The BWH is coupled via the operating panel.

10.5.1

Coupling the Operating Panel

To couple the operating panel, a functioning WLAN connection is required.

As soon as the operator is located in the operational range of the base station or machine
with the HGW, the operating panel can be coupled with the machine. For this purpose, see
the documentation of the corresponding class.

If the operating panel has Safety functions and the base station is coupled with a safety-
related control, it is indicated via the activated 7-segment display which shows the machine
number.

10.5.2

Decoupling the Operating Panel

The operating device can be separated from the machine in several ways.

1. Separating the Safety functions only: In this case, the operating panel can be further

used as a control unit without Safety.

2. Decoupling the operating panel from the machine: The panel has no operating func-

tion and is therewith not a part of the system control unit.

3. Deactivating the WLAN connection: In this case, the panel is used offline only and

has no connection to the machine.

To avoid an emergency stop, perform a controlled decoupling of the HGW.

«
...
41
42
43
44
45
...
»

Содержание 12-246-011



















































Отзывы:

Нет отзывов