Sigma 3-16L Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 79

Sigma 3-16L Скачать руководство пользователя страница 21

Laboratory Centrifuge Sigma 3-16L

Laboratory Centrifuge Sigma 3-16L IVD

3 Safety

Version 03/2014, Rev. 2.11 of 11/08/2017

• sb

21 / 79

Translation of the original operating manual, part no. 0700902

Pos : 56 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0060-0070 Sicherheit von R ot oren und Zubehör @ 44\ mod_1470119200568_68.doc x @ 437008 @ 3 @ 1

3.6.7

Safety of rotors and accessories

Pos : 57 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0060-0070- 0010 Lebens dauer @ 26\ mod_1405319032612_68. doc x @ 192143 @ 3 @ 1

3.6.7.1

Service life

The rotors and accessories have a limited service life.

WARNING

• Perform regular checks (at least once per month) for safety reasons!
• Pay special attention to changes, such as corrosion, cracks, material

abrasion, etc.

•  After 10 years, they must be inspected by the manufacturer.
•  After 50,000 cycles, the rotor must be scrapped for reasons of safety.
•  If other data concerning the service life are engraved on the rotor or

bucket, these data shall apply accordingly. For example, a bucket with
the engraving “max. cycles = 10,000” has a service life of 10,000
cycles, and a rotor with the engraving “Exp. date 02/20” must be
scrapped in February 2020 at the latest (see figure).

Fig. 4: Different service life

– engraving on the bucket/rotor

NOTE

• Refer to the table of rotors and accessories with a different service

life (see chapter 11.4 - "Table of the service life of rotors and
accessories")!

Pos : 58 / 010 U ni vers al module/ Seitenwec hsel @ 0\ mod_1202116244312_0. doc x @ 105 @ @ 1

«
...
19
20
21
22
23
...
»

Содержание 3-16L
















































































Отзывы:

Нет отзывов