- 17 -
a.
Press upward key” ” or downward key " " to select the project, When choice is
"pseudo temp.comp.", press "OK" button to confirm ( tick inside box) then return to main
interface. When the choice is "automatic temperature compensation," press "OK" button to
confirm (tick inside box) and enter into the following interface.
b.
Use key “ ” and ” ”to select the temperature sensor or manual input temperature,
and then press "OK" key to confirm and exit to return settings interface
5.3.4.4 Temperature coefficient setting
a.
Press upward key” ” or downward key " " to select an a
n
to modify or to add ,
then click "OK" button to confirm the cursor moves into the digital part, then press the
ascending key " " or decreasing key” ”to modify values (if holding down the " " key
or “ ” key can change numerical quickly), after the completion press the " OK "button,
