Sigma 1-6P, Руководство по эксплуатации

Страница: 43 / 67

6.2.6 Error Codes
Error no. Kind of error Measure Note
1-9 System error
•
allow to slow down
•
power off/on
All these errors stop
the centrifuge or cause
it to slow down.
10-19 Speedometer error
•
allow to slow down
•
power off/on
20-29 Motor error
•
power off/on
•
ensure ventilation
30-39 EEPROM error
•
allow to slow down
•
power off/on
With errors 34,35,36,
the centrifuge will stop.
With errors 37,38,
error message only.
40-45 Temperature error
(only for refrigerated
centrifuges)
•
allow to slow down
•
power off/on
•
allow to cool down
•
provide better ventilation
46-49 Imbalance error
•
allow to slow down
•
power off
•
eliminate the imbalance
50-59 Lid error
•
press lid key
•
close lid
•
remove foreign matter
from the opening of the
lid lock device
With error 50 and 51,
the centrifuge will stop.
60-69 Process error
•
allow to slow down
•
power off/on
With error 60,
message “power
failure during run”.
With error 61,
message “stop after
power on”.
70-79 Communication error
•
allow to slow down
•
power off/on
80-99 Parameter error
•
allow to slow down
•
provide for better
ventilation
•
power off/on
With error 83, error
message only.
)
Attention!
Fig.6.2: Error Codes
If it is impossible to eliminate the errors, please call the service!
6.2.7 Service Contact
Please contact your supplier for support or in the event of malfunctions and the
supply of spare parts:
SIGMA Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode
Service
+49 55 22 50 07-25 service@sigma-zentrifugen.de
Zentrale +49 55 22 50 07-0 info@sigma-zentrifugen.de
Operating Manual SIGMA 1-6P page 43 of 67
05/2007