SSG5000A RF Signal Generator User Manua
l
55 SSG5000A User Manual
setting range is
|𝐿𝐹 𝐿𝑒𝑣𝑒𝑙 𝑂𝑓𝑓𝑠𝑒𝑡| ≤ 𝑚𝑖𝑛 (2.5𝑉 −
1
2
𝐿𝐹 𝐿𝑒𝑣𝑒𝑙, 2𝑉)
LF Shape
Select
LF
->
LF Source
->
LF Shape
, you can select the LF output signal waveform.
Current
waveform types are “Sine”, “Square”, “Sawtooth”, “Triangle” and “DC”. The default
LF output signal is the “Sine” waveform.
LF Phase
Select
LF
->
LF Source
->
LF Phase
you can set the LF phase. The setting range is -360°
~ 360°, and supports degrees or radian units.
LF Sweep
Sweep State
Select
LF
->
LF Sweep
->
Sweep State
to activate the LF sweep signal generation.
Start Freq
Select
LF
->
LF Sweep
->
Start Freq
to set the start frequency.
Stop Freq
Select
LF
->
LF Sweep
->
Stop Freq
to set the stop frequency.
